D3B Clutch and cylinder rebuild

Decided to get into removing the clutches, and while I'm at it need to have the lift cylinders rebuilt.

Drained the hydraulics, then removed the seat, battery and down to the hydraulics and linkage. The good think is most things are 9/16 of 3/4, the bad, is some of the 9/16 bolts have very little room and can only use the short wrench. Did manage to lock 2 wrenches together to get me some more leverage

View attachment 204028 View attachment 204029 View attachment 204030 ...

D3B Clutch and cylinder rebuild

* This article was originally published here