Caterpillar 12e clutch removal

Hi.
I have the engine out of my old Cat 12e grader. I am going to scrap it for parts. Part it out.
A guy with an old d6 wants the D333 engine.
I don't think he probably needs the bellhousing and clutch. Surely an old d6 dozer would use a different clutch and bellhousing?

I have removed the bolts around the clutch assembly. It seems the clutch wont budge loose from the flywheel?
Is there something I don't know? What do I have to do to get the clutch off so I can get the flywheel and...

Caterpillar 12e clutch removal

D350D 9RF

I am going to look at machine this weekend. Problem with trans oil pushing into engine oil. I have worked other 3306 powered equipment but all tracked. Any advice? Do these have a transmission pump driven off the flywheel like the D8K 77V tractors?

John deere 310G park brake problems

I have had a hell of a time with my 310G s/n to310GX934593 park brake everything works fine on the machine except when the machine is driven for a short distance and park brake is applied then a buzzing sound is heard and is coming from solenoid area below the steering wheel column. I replaced all three solenoid pressure switchs witch are outlined in red but still have buzzing and the buzzing seems to be coming from that area
if I disconnect the X27 solenoid connector the buzzing stops but...

John deere 310G park brake problems

What's your hoe doing?

Hi All, I saw a thread or two in other areas that are a showcase of the projects you have but I hadn't seen one in this section... I'm curious to know both what projects you've done, and what get's your BHL's use most.

I'll post a few pictures below and I'll have to update some as well. My biggest use is knocking over dead trees and dragging them back to a pile or two and digging holes in the pond to build the big dirt pile seen in one of the pictures or creek to fill in holes from removed...

What's your hoe doing?

850J 2008

View attachment 225137 View attachment 225138 View attachment 225139 View attachment 225137 View attachment 225138 View attachment 225139 View attachment 225137 View attachment 225138 View attachment 225139 Got myself a 850J 2008 with 7200 hrs ,

Lists of projects

First up
Decide will try to establish gas to BILs chevy so load up to drop the GMc at the barn and attempt to motor the chevy to the shop.
Not today

Seems RF brake dragging severely
Have new caliper hoses so figured start there. Again Not today.
Local parts house will have calipers and pads in by morning, will assemble the new hoses to these then swap and install new pads.
RF both pistons freezing up extended, LF one piston has never moved out the other wants to hang and pads are all...

Lists of projects

2001 Jcb 214 series 3

I’m confused folks. One guy says my machine is a 2001 Jcb 214-4T the other one says it’s a 2001 Jcb 214 series 3. Says series 3 on the machine but when buddy punches serial number in, it comes up as 214-4T. Anyway my serial number is low 90,000’s and I’m looking for parts breakdowns where I can find part numbers. Why is it such a big problem and secret as to why these machines are hard to locate info when they are out of Europe? I am having a real hard time locating the right service manual...

2001 Jcb 214 series 3