844 Deere

Anyone know what the brake pressure is it is just a straight 844 sorry don't have serial number and does it have its own brake pump or does it get pressure from some where else

* This article was originally published here

JOHN DEERE 333G SALVAGE YARD

Is there a salvage yard that have any deere 333G? Im needing a whole rear grill guard. It got hit pretty hard n the guard is barely touching the fan. i want to replace it and it is the heavy duty one.

* This article was originally published here

John deere 450g lost pump prime

Can someone tell me how to prime the pump on the direct drive transmission model. level ground and won't move. 450g

Thanks Eddie

* This article was originally published here

Volvo 4400

I have recently purchased a BM4400 circa 1985 loader and I am having a few issues with the transmission when things warm up (20 mins of work). The transmission is reluctant to engage and when it does it is usually with a hard thud. When it does grab a gear it seems to have plenty of power, with minimal slip (will just spin the wheels). I have just replaced the trans and drop box oil and cleaned the suction filter. New oil I have put in is straight 30w about 22 litres and about 3 litres of...

Volvo 4400

* This article was originally published here

D6N FC 036-0168.04

Arrangement 246-8488
SN- DJY00552
Comes on when releasing the park brake-operates normally
Was reported unit will derate (idle down no power), restart and all is fine, not sure if its related. I've advised the operator to check for other codes next time it happens
Any input on this would be appreciated
Thx

* This article was originally published here

D3B Clutch and cylinder rebuild

Decided to get into removing the clutches, and while I'm at it need to have the lift cylinders rebuilt.

Drained the hydraulics, then removed the seat, battery and down to the hydraulics and linkage. The good think is most things are 9/16 of 3/4, the bad, is some of the 9/16 bolts have very little room and can only use the short wrench. Did manage to lock 2 wrenches together to get me some more leverage

View attachment 204028 View attachment 204029 View attachment 204030 ...

D3B Clutch and cylinder rebuild

* This article was originally published here

Takeuchi tb025

Just purchased my first excavator. 1999 tak tb025. Got a good deal on it with certain issues so i couldnt pass it up. The pilot control valves are leaking and i was going to replace the entire assembly on both sides but i cannot seem to find the parts. Does anyone else have problem finding parts for the older takeuchi excavators? Ive talked to a local shop with no luck. If anyone can point me in the right direction it will be much appreciated.

* This article was originally published here